SHEET SPECIFICATIONS

STANDARD SHEET SIZE	20" X 29" sheet size must have a 0.5" boarder outside the active area
STANDARD ACTIVE AREA	19" X 26" forming area for domes and embossing
ALIGNMENT HOLES	Parts must have two (2) pre-punched holes or two (2) registration targets printed on each plastic sheet no closer than 1" from edge
MATERIALS	Polyester (PET), Po;ycarbonate, PEN, PVC, ABS
THICKNESS	Up to 0.050"
TACTILE LIFE (PET)	Exceeds 1 million cycles on most designs